24VDC 120W Heavy Duty Adjustable Brushless Circulation Pump DRY RUN PROTECTION

  
24VDC Micro Brushless Pump DC80E-24110A. 24VDC 5A 120W Speed Adjustable/ Power Regulatable. Max Static Lift 11m Max Horizontal Flow Rate 4600L/H. 1'' Threaded Inlet and Outlet (32mm).

This is one of our NEWLY-Designed currently MOST Powerful pump model that supports BEING POWER REGULATED/ SPEED ADJUSTABLE. Pump is designed with DRY-RUN PROTECTION performance: namely, when Pump is powered under 24VDC matching Power Supply. Pump will self-protect itself through significantly slowing its running speed and running power when there exists NO IN-FLOW (abnormal situation).

Until NEW IN-FLOW comes normally, t o. Protect its motor part, avoiding physical damage and heat caused by over-tense friction. Both inlet and outlet are 1'' threaded, with external diameter of 32mm. Max static lift: 11 m (in pressure, 0.11MPa).

Max horizontal flow rate: 4600L/H (1011 GPH). Parameters, cable length and other specific functions can be CUSTOMIZED based on exact discussion and certain MOQ. Brushless DC motor, also known as EC motor; Magnetic Driven.

NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED. Small size but strong; Low consumption & High Efficiency.

Speed Adjustable, can be power regulated at use, very flexible in some applications. DRY RUN PROTECTION design, help avoid over-tense friction and heat at motor part when there exists no in-flow. Long time continuous working with low noise. Safety - no spark, Explosion - proof; Low noise about 40dB. Support both land use and submersible installation (some attention on submersible installation shall be paid, which will be introduced later this page), cannot be self-priming.

Max Working Temperature: 100 degree. Wide range of working voltage; Maintenance - free. Can be used to pump water, oil, other non-corrosive liquids (special liquids are needed to be pre-tested in advance). Variety Power: DC electric source, Battery or Solar Panel, etc. Soft Start with Low in-rush current, Especially suitable for Solar SYS who can not provide over-high startup impulse current.

OEM and ODM are accepted based on MOQ and exact inquiry of customers. Model: DC80E-24110A (currently our most powerful three-phase brushless DC designed pump that supports power regulation). Life Span: can be up to 20000 hrs at clean working environment. Plug: 5.5×2.1 DC Plug. Cable Length: 1.5 meters.

1 x All-new Original DC80E-24110A Powerful Speed Adjustable Pump. NOTE: No power supply is included: If power supply is AC/DC power adapter, output capacity of adapter is recommended to be 24VDC, 6A.

THE LAST ONE PHOTOS that are displayed show comparison between our DC80E-24110A Pump model (current one) and DC50E-24150A Pump model. NOTE: DC50E-24150A Pump is one smaller classical pump model among our company's series, sure, NOT INCLUDED in this item link. 1, as micro brushless dc pump, it works via electronic commutation while not brush friction, so there exists no loss caused by brush friction. Pump works with relatively high efficiency. Stator part is completely potted inside pump body with epoxy material and control circuit part is potted inside control box, completely physically separated from external fluid environment and completely waterproof.

2, Pump supports continuous long time work with relatively low noise at normal working environment. Land use or submersible installation can be both OK, but it cannot be self-priming, just make sure that fluid can actively flow passing through inlet/outlet because pump works via centrifugal force of high-speed rotation of impeller inside (push/throw fluid out).

No long-time dry work without fluid, or it may damage the pump. 3, Pump adopts soft-start mechanism and its start-up current increases gradually (step by step), so there exist no over-high start up current and is suitable for many stable power supply. Note that the max voltage of power supply is advised to be below 26VDC (For model with 24VDC as rated voltage) when in application. IMPORTANT NOTE: Regarding this pump model, it's more recommended that pump is installed at Land use. When in submersible installation, it's more recommended that user can place some more firm waterproof tape on the tail connection with pump body. Before place it under water, for more reliability and stability of waterproof class in long time submersible run. 5, about power polarity: For DC head connector, Inner is Positive, Outer is Negative. DIRECT AC POWER CONNECTION is PROHIBITED! 6, to avoid possible misunderstanding of relevant parameters, here we also say something about flow rate value & max static lift value of pump products.

For static lift value, it means the max vertical height of flow column when outlet is connected with external matching hose/tube, when pump works at rated voltage. For max flow rate value, it means the max flow rate of pump at horizontal level, when pump works at rated voltage. The higher the height, the lower the flow; when height reaches lift value, flow rate becomes zero.

Note that lift value and spraying/shooting height of pump are completely different. So dear users, please do not be confused by them. Meanwhile, certain deviation of around +-10% is advised to be left when in relevant applications, to leave enough margin. Pump supports being adjusted through rotating potentiometer knob of pump.

Through rotating this knob, pump's. Power and flow can be smoothly and continuously adjusted within range of 0 Max value pump can reach. Pump also supports being adjusted by external 05V Analog signal. When in need, wield off potentiometer knob.

Connection and inject corresponding signals to interface ports. It is only recommended to be processed by PROFESSIONALS, when in need.

PWM SPEED ADJUSTABLE WAY: CANNOT BE SUPPORTED IN DEFAULT. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No.

All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. We are always aiming to provide you with nice products and services, as nice as we can. We are always here, just waiting for you. This item is in the category "Home & Garden\Home Improvement\Plumbing & Fixtures\Pumps & Water Filtration Systems\Pumps".

The seller is "shysky-tech" and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

• Model: DC80E-24110A
• Type: Well
• Brand: ZKSJ
• Max horizontal flow rate: 4600 LPH (76.7 L/Min) @24VDC
• Max Static Lift (Head): 11 m @24VDC
• Dimension of Pump; weight: 144mmx213.8mmx147.3mm; ~2.3KG
• Rated Power Consumption: Max 120W @24VDC (5A @24VDC)
• Inlet & Outlet: 1 inch thread, ~32mm
• Medium: Water, Oil, Alcohol, and other non-corrosive fluid
• Driving Mechanism: Brushless DC design, Magnetic separation
• Max working temperature: 100 C
• Bundle Listing: No
• Rated Voltage: 24V DC